home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ASME's Mechanical Engine…ing Toolkit 1997 December
/
ASME's Mechanical Engineering Toolkit 1997 December.iso
/
win_gen
/
lj4win31.exe
/
lha
/
README.TXT
< prev
Wrap
Text File
|
1992-11-08
|
9KB
|
209 lines
*****************************************************************
*****************************************************************
README FILE FOR HEWLETT-PACKARD HPPCL5E PRINTER DRIVER
WITH SUPPORT FOR THE HP LaserJet 4/4M PRINTER
31.1.03 for Windows 3.1
*****************************************************************
*****************************************************************
This README file contains the following information:
* Hewlett-Packard HPPCL5E Printer Driver Introduction
* Installation Instructions for Windows 3.1
* Features of Hewlett-Packard HPPCL5E Printer Driver
* User Hints
* HP Personal Peripherals Assist Line
*****************************************************************
INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY
ACCOMPANY THIS DOCUMENT (collectively referred to as
Hewlett-Packard HPPCL5E Printer Driver version 31.1.03) IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. The
user assumes the entire risk as to the accuracy and the use of
Hewlett-Packard HPPCL5E Printer Driver version 31.1.03.
The HPPCL5E Printer Driver Version 31.1.03 may be copied and
distributed subject to the following conditions:
1) All text must be copied without modification and all pages
must be included;
2) All files on the disk must be copied without modification
(the DOS utility DISKCOPY is appropriate for this purpose);
3) All components of the HPPCL5E Printer Driver Version 31.1.03
must be distributed together; and
4) the HPPCL5E Printer Driver Version 31.1.03 may not be
distributed for profit.
Copyright (c) 1990, 1991, 1992 Hewlett-Packard Company.
Copyright (c) 1985, 1986, 1987, 1988, 1989, 1990 Microsoft Corp.
Copyright (c) 1988, 1989 Aldus Co.
All Rights Reserved.
Intellifont is a registered trademark of AGFA Compugraphic, a
division of AGFA Corporation.
IBM PC and PC-DOS are trademarks of International Business
Machines Corporation.
MS-DOS and Windows are registered trademarks of Microsoft
Corporation.
***************************************************************
HEWLETT-PACKARD HPPCL5E PRINTER DRIVER VERSION 1.03 INTRODUCTION
***************************************************************
This is a release of the Hewlett-Packard HPPCL5E printer
driver with support for the HP LaserJet 4/4M printer, which
includes 600 dpi printer resolution, HP-GL/2, resident TrueType
font technology and the resident Intellifont typefaces.
***************************************************************
INSTALLATION INSTRUCTIONS FOR WINDOWS 3.1
***************************************************************
To install Hewlett-Packard HPPCL5E printer driver version
31.1.03 for Windows 3.1:
NOTE: If you intend to use HP Intellifont for Windows to
produce screen fonts for the Intellifont typefaces in the
HP LaserJet 4/4M, you must install Intellifont for Windows
BEFORE installing the printer driver. Please refer to
the Intellifont for Windows instructions.
1. Choose the Control Panel from the Main Group in Program
Manager.
2. Choose the Printers icon from the Control Panel window.
The Printers dialog box appears.
3. Choose the Add button.
4. From the List of Printers dialog box, select Install
Unlisted or Updated printer (first printer in list).
5. Choose install.
6. Insert the driver disk labeled HPPCL5E version 1.03
into your flexible disk drive and specify the
WIN31DRV directory on your floppy disk to install
the Windows 3.1 driver.
7. Highlight the "HP LaserJet 4/4M" line in the Add Unlisted
or Updated Printers dialog box and press [Enter].
8. Choose Connect if the default port of LPT1 is incorrect.
9. Highlight the correct printer port from the Ports list box
and press [Enter].
10. Choose Setup.
11. Make any necessary changes in the Printer Setup screen to
reflect your printer's configuration.
12. Choose OK.
13. Choose Set as Default Printer if the LaserJet 4/4M is
intended to be your default printer for all of your
Windows applications.
14. Choose Close.
***************************************************************
FEATURES OF HEWLETT-PACKARD HPPCL5E PRINTER DRIVER VERSION 1.03
****************************************************************
The Hewlett-Packard HPPCL5E Printer Driver version 31.1.03
includes support for the HP LaserJet 4/4M printer and the
following new features:
Support for 600 dpi Printer Resolution.
The user can switch between 300 and 600 dpi printer
resolution via the switch in the setup dialog of the
driver.
Support for Graphics Quality.
At 600 dpi mode in the LaserJet 4/4M the driver
supports graphics resolutions of 600, 300, and 150 dpi.
At 300 dpi mode the driver supports 300, 150, and 75 dpi.
The actual graphics resolution settings are denoted by
the descriptive terms of Low, Medium, and High rather
than the actual dpi.
Support for the TrueType typefaces.
All the resident TrueType typefaces in the HP
LaserJet 4/4M printer are supported. Other TrueType
typefaces are supported by building outlines from
the typeface and downloading the characters needed on the
fly. All of the internal TrueType typefaces in the HP
LaserJet 4/4M printer are supported in the 19U symbol set
with the exception of Wingdings in L$ and Symbol in AS.
Hewlett-Packard has made the TrueType format screen
fonts available for the 35 Intellifont format typefaces
in LaserJet 4/4M. These screen fonts are available through
your local Hewlett-Packard dealer and are not included in
this package. TrueType equivalent screen fonts allow for a
more closely integrated Windows 3.1 solution.
Support for the internal Intellifont typefaces.
All the internal Intellifont typefaces in the HP LaserJet
4/4M printer are supported in the 19U symbol set. To obtain
WYSIWYG results, use HP Intellifont which supports
on-the-fly screen fonts to match your printer fonts in
Windows 3.1.
Support for HP-GL/2
Support for HP-GL/2 is in version 1.03. Under the Options
Dialog in the Printer Setup, a new option of "Graphics
Mode" is available. Two options are present: HP-GL/2 or
Raster. The first choice enables HP-GL/2 which will
increase print performance but may possibly cause 21 Print
Overruns in some applications. The second choice disables
HP-GL/2 and uses raster only. The default for Graphics Mode
is HP-GL/2.
If you do encounter print difficulties in the default
Graphics Mode, it is recommended that you change the
mode to Raster and try your print job again. Additional
information on this topic may be found in the help files
that accompany this driver. Choose Help from the driver
dialog screens or the HP font installer screens to access
the HELP information.
Dialog Support for Resolution Enhancement Technology
Another feature added to the Option Dialog is the
Resolution Enhancement technology box. The options here
are: Printer Default, Light, Medium, Dark, and Off.
***************************************************************
FEATURES OF HP LaserJet 4/4M NOT SUPPORTED BY HPPCL5E PRINTER
DRIVER VERSION 31.1.03
***************************************************************
Bi-directional communication. This is not currently
supported in Windows 3.1.
***************************************************************
USER HINTS
***************************************************************
On-line help files are included for the HPPCL5E printer driver and
the HP font installer screens. Choose Help from these screens to
access the HELP information.
***************************************************************
HEWLETT-PACKARD PERSONAL PERIPHERALS ASSIST LINE
(USA and Canada only)
***************************************************************
You can call the Hewlett-Packard Personal Peripherals Assist Line
weekdays between 7 a.m. and 6 p.m. (Mountain Standard Time),
except for Wednesday when the hours are 7 a.m. to 4 p.m.:
(208) 323-2551.